IMCInter Module Communication
v5.5.11

Battery Detailed Info

BDI ID 2035PeriodicDeprecated

This message is deprecated and should not be used in new code.

Payload
18 bytes
Packet
40 bytes
Source
vehicle
Category
Sensors

Deprecated: use QueryBmsData/BmsData instead. Used to debug the state of a BMS.

#Fields

Offset FieldTypeUnitRangeDescription
0 #sohState of Health int16_t % –

State of health as a percentage (0-100%)

2 #is_fdIs Fully Discharged uint8_t Enumerated –

Indicates if the battery is fully discharged

0DSTATE_NOT_FULLY_DISCHARGEDNot Fully Discharged
1DSTATE_FULLY_DISCHARGEDFully Discharged
2DSTATE_UNKNOWNUnknown
3 #is_fcIs Fully Charged uint8_t Enumerated –

Indicates if the battery is fully charged

0CSTATE_NOT_FULLY_CHARGEDNot Fully Charged
1CSTATE_FULLY_CHARGEDFully Charged
2CSTATE_UNKNOWNUnknown
4 #restREST uint8_t Enumerated –

Indicates if the REST flag of the BMS is set

0REST_STATE_REST_NOT_SETREST_NOT_SET
1REST_STATE_REST_SETREST_SET
2REST_STATE_UNKNOWNUnknown
5 #vdqVDQ uint8_t Enumerated –

Indicates if VDQ flag of the BMS is set

0VDQ_STATE_VDQ_NOT_SETVDQ_NOT_SET
1VDQ_STATE_VDQ_SETVDQ_SET
2VDQ_STATE_UNKNOWNUnknown
6 #cycle_countCycle Count int32_t – –

Number of discharge cycles the battery has experienced.

10 #full_capacityFull Charge Capacity int32_t mAh –

The full charge capacity under system-use conditions.

14 #rem_capacityRemaining Capacity int32_t mAh –

The predicted remaining battery capacity