IMCInter Module Communication
v5.5.11

Communications Relay

CommsRelay ID 472
Payload
31 bytes
Packet
53 bytes
Source
unspecified
Category
Maneuvering

In this maneuver, a vehicle drives to the center of two other systems (a, b) in order to be used as a communications relay.

#Fields

Offset FieldTypeUnitRangeDescription
0 #latLatitude WGS-84 fp64_t rad −π/2 … π/2

WGS-84 Latitude for start point.

8 #lonLongitude WGS-84 fp64_t rad −π … π

WGS-84 Longitude for start point.

16 #speedSpeed fp32_t – –

Reference speed.

20 #speed_unitsSpeed Units uint8_t Enumerated
default 0

Reference speed units.

3 values from SpeedUnits
0SUNITS_METERS_PSMeters per second
1SUNITS_RPMRPM
2SUNITS_PERCENTAGEPercentage
21 #durationDuration uint16_t s –

Duration of maneuver, 0 for unlimited duration.

23 #sys_aSystem A uint16_t – –

The IMC id of the system A.

25 #sys_bSystem B uint16_t – –

The IMC id of the system B.

27 #move_thresholdMove threshold fp32_t m –

Move only if the distance to the target is bigger than this threshold.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: