IMCInter Module Communication
v5.5.11

Device Calibration State

DevCalibrationState ID 13
Payload
≥ 5 bytes, variable
Packet
≥ 27 bytes
Source
vehicle, ccu
Category
Core

State of the calibration procedure.

#Fields

Offset FieldTypeUnitRangeDescription
0 #total_stepsTotal Steps uint8_t – –

Total number of steps of the calibration procedure.

1 #step_numberCurrent Step Number uint8_t – –

Number of the current step being performed.

2 #stepDescription plaintext – –

Human-readable description of the current step.

var #flagsFlags uint8_t Bitfield –

Additional flags.

0x01DCS_PREVIOUS_NOT_SUPPORTEDPrevious Step Not Supported

Jumping to the previous calibration step is not supported.

0x02DCS_NEXT_NOT_SUPPORTEDNext Step Not Supported

Jumping to the next calibration step is not supported.

0x04DCS_WAITING_CONTROLWaiting Device Calibration Control

The calibration procedure was suspended and must be resumed or cancelled with a DeviceCalibrationControl message.

0x08DCS_ERRORCalibration Error

Calibration was interrupted due to an error and must be restarted or cancelled with a DeviceCalibrationControl message.

0x10DCS_COMPLETEDCalibration Procedure Completed

The calibration procedure was completed.