IMCInter Module Communication
v5.5.11

Follow Reference Maneuver

FollowReference ID 478
Payload
15 bytes
Packet
37 bytes
Source
ccu
Category
Maneuvering

This maneuver follows a reference given by an external entity.

#Fields

Offset FieldTypeUnitRangeDescription
0 #control_srcControlling Source uint16_t – –

The IMC identifier of the source system that is allowed to provide references to this maneuver. If the value ''0xFFFF'' is used, any system is allowed to command references.

2 #control_entControlling Entity uint8_t – –

The entity identifier of the entity that is allowed to provide references to this maneuver. If the value ''0xFF'' is used, any entity is allowed to command references.

3 #timeoutReference Update Timeout fp32_t – –

The ammount of time, in seconds, after which the maneuver will be terminated if no reference has been received. In other words, the controlling entity should send reference updates in shorter periods than 'timeout'.

7 #loiter_radiusLoiter Radius fp32_t – –

Whenever an intended reference is achieved, this maneuver will maintain the vehicle in vaticiny of that location. The loiter radius is used to define the radius of this (xy) area.

11 #altitude_intervalAltitude Interval fp32_t – –

Similarly to Loiter Radius, this field is used to define the "z" distance considered to be inside the vacitiny of the target location. An AUV may, for instance, be floating until it more than z units above the current reference, in which case it actively changes its position in order to achieve the desired depth / altitude.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: