IMCInter Module Communication
v5.5.11

Formation Control Parameters

FormationControlParams ID 822
Payload
41 bytes
Packet
63 bytes
Source
ccu, vehicle
Category
Maneuvering

Formation controller paramenters, as: trajectory gains, control boundary layer thickness, and formation shape gains.

#Fields

Offset FieldTypeUnitRangeDescription
0 #ActionAction uint8_t Enumerated –

Action on the vehicle formation control parameters.

0OP_REQRequest
1OP_SETSet
2OP_REPReport
1 #lon_gainLongitudinal Gain fp32_t – –

Trajectory gain over the vehicle longitudinal direction.

5 #lat_gainLateral Gain fp32_t – –

Trajectory gain over the vehicle lateral direction.

9 #bond_thickBoundary Layer Thickness fp32_t – –

Control sliding surface boundary layer thickness.

13 #lead_gainLeader Gain fp32_t – –

Formation shape gain (absolute vehicle position tracking). Leader control importance gain (relative to the sum of every other formation vehicle).

17 #deconfl_gainDeconfliction Gain fp32_t – –

Collision avoidance and formation shape gain (position tracking relative to the other formation vehicles). Individual vehicle importance gain (relative to the leader), when the relative position or the velocity state indicate higher probability of collision.

21 #accel_switch_gainAcceleration Switch Gain fp32_t – –

Switch gain to compensate the worst case of the wind flow acceleration.

25 #safe_distSafety Distance fp32_t – –

Inter-vehicle safety distance.

29 #deconflict_offsetDeconfliction Offset fp32_t – –

Distance offset which defines the buffer area beyond the safety distace.

33 #accel_safe_marginAcceleration Safety Margin fp32_t – –

Safety margin to compensate for possible shortfalls from the predicted maximum acceleration that a vehicle can generate.

37 #accel_lim_xMaximum Longitudinal Acceleration fp32_t – –

Maximum predicted longitudinal acceleration a vehicle can generate.

#References

Carried inline by: