IMCInter Module Communication
v5.5.11

Loiter Maneuver

Loiter ID 453
Payload
≥ 50 bytes, variable
Packet
≥ 72 bytes
Source
ccu
Category
Maneuvering

The Loiter maneuver makes the vehicle circle around a specific waypoint with fixed depth reference.

#Fields

Offset FieldTypeUnitRangeDescription
0 #timeoutTimeout uint16_t s –

The timeout indicates the time that an error should occur if exceeded.

2 #latLatitude WGS-84 fp64_t rad −π/2 … π/2

WGS-84 Latitude coordinate.

10 #lonLongitude WGS-84 fp64_t rad −π … π

WGS-84 Longitude coordinate.

18 #zZ Reference fp32_t m –

Maneuver reference in the z axis. Use z_units to specify whether z represents depth, altitude or other.

22 #z_unitsZ Units uint8_t Enumerated
default 0

Units of the z reference.

4 values from ZUnits
0Z_NONENone
1Z_DEPTHDepth
2Z_ALTITUDEAltitude
3Z_HEIGHTHeight
23 #durationDuration uint16_t s –

The duration of this maneuver. Use '0' for unlimited duration time.

25 #speedSpeed fp32_t – –

Maneuver speed reference.

29 #speed_unitsSpeed Units uint8_t Enumerated
default 0

Speed units.

3 values from SpeedUnits
0SUNITS_METERS_PSMeters per second
1SUNITS_RPMRPM
2SUNITS_PERCENTAGEPercentage
30 #typeLoiter Type uint8_t Enumerated ≤ 4

Loiter maneuver type.

0LT_DEFAULTDefault
1LT_CIRCULARCircular
2LT_RACETRACKRace track
3LT_EIGHTFigure 8
4LT_HOVERHover
31 #radiusRadius fp32_t m 1 … 100000

Radius of the maneuver.

35 #lengthLength fp32_t m 1 … 100000

Length of the maneuver.

39 #bearingBearing fp64_t rad 0 … 2π

Bearing of the maneuver.

47 #directionDirection uint8_t Enumerated ≤ 3

Desired direction.

0LD_VDEPVehicle Dependent
1LD_CLOCKWClockwise
2LD_CCLOCKWCounter Clockwise
3LD_IWINDCURRInto the wind/current
48 #customCustom settings for maneuver plaintext TupleList –

Custom settings for maneuver.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: