IMCInter Module Communication
v5.5.11

Magnetometer Maneuver

Magnetometer ID 499
Payload
≥ 43 bytes, variable
Packet
≥ 65 bytes
Source
ccu
Category
Maneuvering

Magnetometer calibration maneuver (i.e: one square pattern in one direction, a second square in the opposite direction)

#Fields

Offset FieldTypeUnitRangeDescription
0 #timeoutTimeout uint16_t s –

The amount of time the maneuver is allowed to run.

2 #latLatitude WGS-84 fp64_t rad −π/2 … π/2

WGS-84 Latitude of target waypoint.

10 #lonLongitude WGS-84 fp64_t rad −π … π

WGS-84 Longitude of target waypoint.

18 #zZ Reference fp32_t m –

Maneuver reference in the z axis. Use z_units to specify whether z represents depth, altitude or other.

22 #z_unitsZ Units uint8_t Enumerated
default 0

Units of the z reference.

4 values from ZUnits
0Z_NONENone
1Z_DEPTHDepth
2Z_ALTITUDEAltitude
3Z_HEIGHTHeight
23 #speedSpeed fp32_t – –

Maneuver speed reference.

27 #speed_unitsSpeed Units uint8_t Enumerated
default 0

Speed units.

3 values from SpeedUnits
0SUNITS_METERS_PSMeters per second
1SUNITS_RPMRPM
2SUNITS_PERCENTAGEPercentage
28 #bearingBearing fp64_t rad 0 … 2π

Rows bearing angle.

36 #widthWidth fp32_t m ≥ 50

Width of the maneuver.

40 #directionDirection uint8_t Enumerated ≤ 1

Desired direction.

0MD_CLOCKW_FIRSTClockwise First
1MD_CCLOCKW_FIRSTCounter Clockwise First
41 #customCustom settings for maneuver plaintext TupleList –

Custom settings for maneuver.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: