Scheduled Goto
ScheduledGoto
ID 487
- Payload
- 35 bytes
- Packet
- 57 bytes
- Source
- ccu
- Category
- Maneuvering
This maneuver is used to command the vehicle to arrive at some destination at a specified absolute time.
The vehicle's speed will vary according to environment conditions and/or maneuver start time.
#Fields
| Offset | Field | Type | Unit | Range | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | #arrival_timeTime of arrival |
fp64_t |
s | – | Unix timestamp, in seconds, for the arrival at the destination. |
||||||||||||
| 8 | #latDestination Latitude WGS-84 |
fp64_t |
rad | −π/2 … π/2 | WGS-84 Latitude of target waypoint. |
||||||||||||
| 16 | #lonDestination Longitude WGS-84 |
fp64_t |
rad | −π … π | WGS-84 Longitude of target waypoint. |
||||||||||||
| 24 | #zDestination Z Reference |
fp32_t |
m | – | Target reference in the z axis. Use z_units to specify whether z represents depth, altitude or other. |
||||||||||||
| 28 | #z_unitsZ Units |
uint8_t |
Enumerated | default
0 |
Units of the destination z reference. 4 values from
|
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
travel_zTravel Z Referencefp32_tZ reference to use while travelling to the destination.
travel_z_unitsTravel Z Unitsuint8_t0Z reference units to use while travelling to the destination.
4 values from ZUnits
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
delayedDelayed Behavioruint8_t0What to do if the vehicle fails to arrive before or at the requested time.
0 | DBEH_RESUME | Resume If the vehicle fails to arrive at the specified time, it will keep going to the destination at top speed and only then consider this maneuver completed. |
1 | DBEH_SKIP | Skip If the vehicle fails to arrive at the specified time, it will stop the current maneuver and advance to the next one (independently of how far it is from destination). |
2 | DBEH_FAIL | Fail If the vehicle fails to arrive at the specified time, it will stop the execution of this maneuver with a FAILED result (the entire plan will be stopped). |
#References
Member of Maneuver: it can be sent where that group is expected.
Carried inline by:
VehicleCommand.maneuvermessage · via ManeuverPlanManeuver.datamessage · via ManeuverManeuverResumed.man_listmessage-list · via Maneuver