Set Pose Maneuver
SetPose
ID 2046
- Payload
- ≥ 55 bytes, variable
- Packet
- ≥ 77 bytes
- Source
- ccu
- Category
- Maneuvering
A "SetPose" is a maneuver specifying a movement of the vehicle to a specific pose (position and orientation). The position is described by the WGS-84 waypoint coordinate and target Z reference, while the orientation is described by the Euler angles (roll, pitch and yaw).
#Fields
| Offset | Field | Type | Unit | Range | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | #durationDuration |
int16_t |
s | – | The duration of this maneuver. Use '0' for unlimited duration time. Use '-1' to disregard this field. |
||||||||||||
| 2 | #latLatitude WGS-84 |
fp64_t |
rad | −π/2 … π/2 | WGS-84 Latitude of target waypoint. |
||||||||||||
| 10 | #lonLongitude WGS-84 |
fp64_t |
rad | −π … π | WGS-84 Longitude of target waypoint. |
||||||||||||
| 18 | #zZ Reference |
fp32_t |
m | – | Target reference in the z axis. Use z_units to specify whether z represents depth, altitude or other. |
||||||||||||
| 22 | #z_unitsZ Units |
uint8_t |
Enumerated | default
0 |
Units of the z reference. 4 values from
|
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
speedSpeedfp32_tManeuver speed reference.
speed_unitsSpeed Unitsuint8_t0Speed units.
3 values from SpeedUnits
0 | SUNITS_METERS_PS | Meters per second |
1 | SUNITS_RPM | RPM |
2 | SUNITS_PERCENTAGE | Percentage |
rollRollfp64_tThe phi Euler angle in which the vehicle should set its attitude.
pitchPitchfp64_tThe theta Euler angle in which the vehicle should set its attitude.
yawYawfp64_tThe psi Euler angle in which the vehicle should set its attitude.
flagsFlagsuint8_tFlags of the maneuver.
0x01 | FLG_CURR_HPOS | Keep current horizontal position If this flag is set, lat/lon fields should be ignored and current vehicle lat/lon should be considered as target lat/lon. |
0x80 | FLG_CURR_POSE | Keep Pose Keep current pose (6DOF) instead of setting it to the specified values. |
customCustom settings for maneuverplaintextCustom settings for maneuver.
#References
Member of Maneuver: it can be sent where that group is expected.
Carried inline by:
VehicleCommand.maneuvermessage · via ManeuverPlanManeuver.datamessage · via ManeuverManeuverResumed.man_listmessage-list · via Maneuver