IMCInter Module Communication
v5.5.11

Vehicle Operational Limits

VehicleOperationalLimits ID 16
Payload
69 bytes
Packet
91 bytes
Source
vehicle, ccu
Category
Core

Vehicle opertional limits. For aircraft this should represent the flight envelope and the dynamic contraints.

#Fields

Offset FieldTypeUnitRangeDescription
0 #opAction on the vehicle operational limits uint8_t Enumerated –

Action on the vehicle operation limits

0OP_REQUESTRequest
1OP_SETSet
2OP_REPORTReport
1 #speed_minMinimum speed fp32_t m/s ≥ 0

Minimum operation speed. For aircraft this is equal or larger then the stall speed.

5 #speed_maxMaximum speed fp32_t m/s ≥ 0

Maximum operation speed. For aircraft this is limited by the engine power or structural contrains.

9 #long_accelLongitudinal maximum acceleration fp32_t m/s/s ≥ 0

Maximum longitudinal acceleration.

13 #alt_max_mslMaximum MSL altitude fp32_t m ≥ 0

Maximum altitude above mean-sea-level.

17 #dive_fraction_maxMaximum Dive Rate Speed Fraction fp32_t – ≥ 0

Maximum dive rate (negative vertical speed) as a fraction of the longitudinal speed.

21 #climb_fraction_maxMaximum Climb Rate Speed Fraction fp32_t – ≥ 0

Maximum climb rate (positive vertical speed) as a fraction of the longitudinal speed.

25 #bank_maxBank limit fp32_t rad ≥ 0

Limit to the bank angle (roll; angle over the xx body-axis).

29 #p_maxBank rate limit fp32_t rad/s ≥ 0

Limit to the bank angular rate (roll; angle over the xx body-axis).

33 #pitch_minMinimum pitch angle fp32_t rad –

Minimum pitch angle (angle over the xx body-axis).

37 #pitch_maxMaximum pitch angle fp32_t rad –

Maximum pitch angle (angle over the xx body-axis).

41 #q_maxMaximum pitch rate fp32_t rad/s ≥ 0

Maximum pitch angular rate (angle over the xx body-axis).

45 #g_minMinimum load factor fp32_t g ≤ 0

Minimum load factor, i.e., maximum positive acceleration in the zz body-axis as a factor of the gravity acceleration at mean-sea-level.

49 #g_maxMaximum load factor fp32_t g ≥ 0

Maximum load factor, i.e., maximum negative acceleration in the zz body-axis as a factor of the gravity acceleration at mean-sea-level.

53 #g_lat_maxMaximum lateral load factor fp32_t g ≥ 0

Maximum lateral load factor, i.e., maximum acceleration in the yy body-axis as a factor of the gravity acceleration at mean-sea-level.

57 #rpm_minMinimum RPMs fp32_t rpm ≥ 0

Minimum motor RPMs.

61 #rpm_maxMaximum RPMs fp32_t rpm ≥ 0

Maximum motor RPMs.

65 #rpm_rate_maxMaximum RPM rate fp32_t rpm/s ≥ 0

Maximum motor RPMs' rate of change.