WiFi Statistics
WifiStats
ID 2011
- Payload
- ≥ 29 bytes, variable
- Packet
- ≥ 51 bytes
- Source
- ccu, vehicle
- Category
- Networking
This message is used to log wifi connection statistics, heavily influenced by the stats available in ubiquiti radios.
#Fields
| Offset | Field | Type | Unit | Range | Description |
|---|---|---|---|---|---|
| 0 | #macMAC Address |
plaintext |
– | – | MAC address of the associated radio. |
| var | #ipIP Address |
plaintext |
– | – | Last IP address of the associated radio. |
| var | #ccqClient Connection Quality |
uint8_t |
% | – | Client Connection Quality indicator |
| var | #noise_floorNoise Floor |
int16_t |
dB | – | Noise Floor (measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system, where noise is defined as any signal other than the one being monitored). |
| var | #signalSignal |
int16_t |
dB | – | Measure of the signal of the associated radio. |
| var | #rssiRSSI |
uint16_t |
– | – | Received Signal Strength Indicator, in arbitraty units. The bigger the RSSI, the better the connection quality. |
| var | #rx_rateReception Data Rate |
int16_t |
Mbps | – | Reception data rate for the associated radio, -1 if not available. |
| var | #tx_rateTransmission Data Rate |
int16_t |
Mbps | – | Transmission data rate for the associated radio, -1 if not available. |
| var | #tx_latencyTransmission Latency |
int16_t |
s | – | Latency of transmission to the associated radio, -1 if not available. |
| var | #tx_powerTransmission Power |
int16_t |
s | – | Power of transmission to the associated radio, -1 if not available. |
| var | #rx_countReception Counter |
uint32_t |
byte | – | Amount of bytes already received from the associated radio. |
| var | #tx_countTransmission Counter |
uint32_t |
byte | – | Amount of bytes already transmitted to the associated radio. |
| var | #distanceDistance |
int16_t |
m | – | Distance for the associated radio, -1 if not available. |