Follow Point Maneuver
FollowPoint
ID 494
- Payload
- ≥ 30 bytes, variable
- Packet
- ≥ 52 bytes
- Source
- unspecified
- Category
- Maneuvering
This maneuver behaves by following a point.
#Fields
| Offset | Field | Type | Unit | Range | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | #targetSource To Follow |
plaintext |
– | – | The identifier of the point source to follow (via RemoteSensorInfo or EstimatedState). |
||||||||||||
| var | #max_speedMaximum Speed |
fp32_t |
m/s | ≥ 0 | Use this speed when travelling from afar. |
||||||||||||
| var | #speed_unitsSpeed Units |
uint8_t |
Enumerated | – | Indicates the units used for the maximum speed value. 3 values from
|
0 | SUNITS_METERS_PS | Meters per second |
1 | SUNITS_RPM | RPM |
2 | SUNITS_PERCENTAGE | Percentage |
latLatitude WGS-84fp64_tWGS-84 Latitude of maneuver in the map. Ignored during execution.
lonLongitude WGS-84fp64_tWGS-84 Longitude of maneuver in the map. Ignored during execution.
zZfp32_tUse z_units to specify whether z represents depth, altitude or other.
z_unitsZ Unitsuint8_tdefault
0Units of the z reference.
4 values from ZUnits
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
customCustom settings for maneuverplaintextCustom settings for maneuver.
#References
Member of Maneuver: it can be sent where that group is expected.
Carried inline by:
VehicleCommand.maneuvermessage · via ManeuverPlanManeuver.datamessage · via ManeuverManeuverResumed.man_listmessage-list · via Maneuver