IMCInter Module Communication
v5.5.11

Autonomous Section

AutonomousSection ID 493
Payload
≥ 52 bytes, variable
Packet
≥ 74 bytes
Source
unspecified
Category
Maneuvering

This maneuver triggers an external controller that will guide the vehicle during a specified duration of time or until it relinquishes control using (ManeuverDone). The external controller is allowed to drive the vehicle only inside the specified boundaries.

#Fields

Offset FieldTypeUnitRangeDescription
0 #latLatitude WGS-84 fp64_t rad −π/2 … π/2

WGS-84 Latitude of the initial location.

8 #lonLongitude WGS-84 fp64_t rad −π … π

WGS-84 Longitude of the initial location.

16 #speedSpeed fp32_t – –

Maneuver speed reference.

20 #speed_unitsSpeed Units uint8_t Enumerated
default 0

Speed units.

3 values from SpeedUnits
0SUNITS_METERS_PSMeters per second
1SUNITS_RPMRPM
2SUNITS_PERCENTAGEPercentage
21 #limitsEnforced Limits uint8_t Bitfield –
0x01ENFORCE_DEPTHMaximum Depth Limit
0x02ENFORCE_ALTITUDEMinimum Altitude Limit
0x04ENFORCE_TIMEOUTTime Limit
0x08ENFORCE_AREA2DPolygonal Area Limits
22 #max_depthMaximum depth fp64_t m –

Maximum depth the autonomous controller is allowed to drive to.

30 #min_altMinimum altitude fp64_t m –

Minimum altitude the autonomous controller is allowed to drive to.

38 #time_limitTime Limit fp64_t s –

The time after which this maneuver should be stopped (if still active and TIMEOUT is enforced).

46 #area_limitsArea Limits message-list<PolygonVertex> – –

The boundaries of the admissable area for this autonomous section.

var #controllerController plaintext – –

The name of the controlling agent that will be allowed to guide the vehicle during the AutononousSection.

var #customCustom settings for maneuver plaintext TupleList –

Custom settings for maneuver.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: