Goto Maneuver
Goto
ID 450
- Payload
- ≥ 54 bytes, variable
- Packet
- ≥ 76 bytes
- Source
- ccu
- Category
- Maneuvering
A "Goto" is a maneuver specifying a movement of the vehicle to a target waypoint. The waypoint is described by the WGS-84 waypoint coordinate and target Z reference.
Mandatory parameters defined for a "Goto" are timeout, speed and speed units.
Optional parameters may be defined for the target Euler Angles (roll, pitch and yaw) though these parameters may not be considered by all maneuver controllers in charge of the execution of this type of maneuver.
#Fields
| Offset | Field | Type | Unit | Range | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | #timeoutTimeout |
uint16_t |
s | – | The amount of time the maneuver is allowed to run. |
||||||||||||
| 2 | #latLatitude WGS-84 |
fp64_t |
rad | −π/2 … π/2 | WGS-84 Latitude of target waypoint. |
||||||||||||
| 10 | #lonLongitude WGS-84 |
fp64_t |
rad | −π … π | WGS-84 Longitude of target waypoint. |
||||||||||||
| 18 | #zZ Reference |
fp32_t |
m | – | Target reference in the z axis. Use z_units to specify whether z represents depth, altitude or other. |
||||||||||||
| 22 | #z_unitsZ Units |
uint8_t |
Enumerated | default
0 |
Units of the z reference. 4 values from
|
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
speedSpeedfp32_tManeuver speed reference.
speed_unitsSpeed Unitsuint8_t0Speed units.
3 values from SpeedUnits
0 | SUNITS_METERS_PS | Meters per second |
1 | SUNITS_RPM | RPM |
2 | SUNITS_PERCENTAGE | Percentage |
rollRollfp64_tThe phi Euler angle in which the vehicle should set its attitude. Use '-1' for this field to be unconsidered. Otherwise the value spans from 0 to 2 Pi.
pitchPitchfp64_tThe theta Euler angle in which the vehicle should set its attitude. Use '-1' for this field to be disconcerted. Otherwise the value spans from 0 to 2 Pi.
yawYawfp64_tThe psi Euler angle in which the vehicle should set its attitude. Use '-1' for this field to be considered. Otherwise the value spans from 0 to 2 Pi.
customCustom settings for maneuverplaintextCustom settings for maneuver.
#References
Member of Maneuver: it can be sent where that group is expected.
Carried inline by:
VehicleCommand.maneuvermessage · via ManeuverPlanManeuver.datamessage · via ManeuverManeuverResumed.man_listmessage-list · via Maneuver