PopUp Maneuver
PopUp
ID 451
- Payload
- ≥ 37 bytes, variable
- Packet
- ≥ 59 bytes
- Source
- ccu
- Category
- Maneuvering
The Pop Up maneuver makes the vehicle come to the surface at a specific waypoint. This maneuver is restricted to underwater vehicles.
#Fields
| Offset | Field | Type | Unit | Range | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | #timeoutTimeout |
uint16_t |
s | – | The amount of time the maneuver is allowed to run. If the maneuver is not completed in the amount of time specified an error will be generated. |
||||||||||||
| 2 | #latLatitude WGS-84 |
fp64_t |
rad | −π/2 … π/2 | WGS-84 Latitude. |
||||||||||||
| 10 | #lonLongitude WGS-84 |
fp64_t |
rad | −π … π | WGS-84 Longitude. |
||||||||||||
| 18 | #zZ Reference |
fp32_t |
m | – | Maneuver reference in the z axis. Use z_units to specify whether z represents depth, altitude or other. |
||||||||||||
| 22 | #z_unitsZ Units |
uint8_t |
Enumerated | default
0 |
Units of the z reference. 4 values from
|
0 | Z_NONE | None |
1 | Z_DEPTH | Depth |
2 | Z_ALTITUDE | Altitude |
3 | Z_HEIGHT | Height |
speedSpeedfp32_tManeuver speed reference.
speed_unitsSpeed Unitsuint8_t0Speed units.
3 values from SpeedUnits
0 | SUNITS_METERS_PS | Meters per second |
1 | SUNITS_RPM | RPM |
2 | SUNITS_PERCENTAGE | Percentage |
durationDurationuint16_tThe duration of this maneuver at surface level. Only used if flag WAIT_AT_SURFACE is on.
radiusRadiusfp32_tRadius of the maneuver. Only used if flag STATION_KEEP is on.
flagsFlagsuint8_tFlags of the maneuver.
0x01 | FLG_CURR_POS | Start from current position If this flag is set, lat/lon/start_z fields should be ignored and current vehicle position should be considered as starting point for ascent/descent. |
0x02 | FLG_WAIT_AT_SURFACE | Wait at surface If this flag is set, duration field is used to hold position at surface for that amount of time. |
0x04 | FLG_STATION_KEEP | Station keeping This flag will only make sense if WAIT_AT_SURFACE is also set. While holding position at surface the vehicle will assume a station keeping behavior. |
customCustom settings for maneuverplaintextCustom settings for maneuver.
#References
Member of Maneuver: it can be sent where that group is expected.
Carried inline by:
VehicleCommand.maneuvermessage · via ManeuverPlanManeuver.datamessage · via ManeuverManeuverResumed.man_listmessage-list · via Maneuver