IMCInter Module Communication
v5.5.11

Land Maneuver

Land ID 492
Payload
≥ 45 bytes, variable
Packet
≥ 67 bytes
Source
unspecified
Category
Maneuvering

Automatic landing on the ground, for UAVs. This maneuver specifies the target touchdown location and sets the final approach based on the maneuver bearing and glide slope parameters.

#Fields

Offset FieldTypeUnitRangeDescription
0 #latLatitude WGS-84 fp64_t rad −π/2 … π/2

WGS-84 Latitude of touchdown waypoint.

8 #lonLongitude WGS-84 fp64_t rad −π … π

WGS-84 Longitude of touchdown waypoint.

16 #zZ Reference fp32_t m –

Target altitude or height for the automatic landing.

20 #z_unitsZ Units uint8_t Enumerated
default 0

Units of the z reference and abort z reference.

4 values from ZUnits
0Z_NONENone
1Z_DEPTHDepth
2Z_ALTITUDEAltitude
3Z_HEIGHTHeight
21 #speedSpeed fp32_t – –

Maneuver speed reference.

25 #speed_unitsSpeed Units uint8_t Enumerated
default 0

Speed units.

3 values from SpeedUnits
0SUNITS_METERS_PSMeters per second
1SUNITS_RPMRPM
2SUNITS_PERCENTAGEPercentage
26 #abort_zAbort Z Reference fp32_t m –

Abort altitude or height. If landing is aborted while executing, the UAV will maintain its course and attempt to climb to the abort z reference.

30 #bearingBearing fp64_t rad 0 … 2π

Land bearing angle.

38 #glide_slopeGlide Slope uint8_t % ≤ 10

Ratio of the distance from the last waypoint to the landing point (touchdown) and the height difference between them.

39 #glide_slope_altGlide Slope Altitude fp32_t m –

Height difference between the last waypoint to the landing point (touchdown).

43 #customCustom settings for maneuver plaintext TupleList –

Custom settings for maneuver.

#References

Member of Maneuver: it can be sent where that group is expected.

Carried inline by: